Pdu card problem

[npereira]

Good morning 
I have 4 displays (Version 0N-1642), I think these cards will be from V3. 
At this moment the cards show nothing on the display, I think the Fw is corrupt or incorrect. Because it was done with the PEN of the “other NMCV2 cards….

1- Validate the correct version of these cards
2- What is the current firmware for these cards, where i can download ?
3- How to update the fw on the cards (create apcfirm folder, place the firmware and the nmc3.rcf file inside)
4- i try serial port but not ha
Thanks

[JLehr]

Hi @npereira,

I couldn't find much about this product other than this addendum about replacing the display modules. Maybe it will give you some insight into the issue you're seeing.

https://download.schneider-electric.com/files?p_Doc_Ref=TME34266&p_enDocType=User+guide&p_File_Name=...

[npereira]

I can now connect via the serial port, and I installed the new firmware 2.5.2.5, but the display on the card still doesn't work. The display connects to a board that has an epromm. Can anyone tell me what the .bin is for this epromm? Because I think that could be the problem...