EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2020-07-05 07:30 PM
This question was originally posted on DCIM Support by Kevin Kolobe on 2019-05-22
Hi,
I would like to confirm whether the new Netbotz 750 will support GSM modems and Sea Level I/O devices? We have been making use of these in our deployments and need to confirm that the 750 also offers the same.
(CID:143760177)
Posted: 2020-07-05 07:30 PM
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2019-05-22
Dear Kevin,
As far as I know, the USB ports available on Netbotz Rack Monitor 750 is reserved for future use. So you can NOT use the USB ports for Modems and Sea Level I/O devices as per the manual.
Click here to view the Netbotz 750 appliance compatibility matrix.
Regards,
Bala
(CID:143760183)
Posted: 2020-07-05 07:30 PM
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2019-05-22
Dear Kevin,
As far as I know, the USB ports available on Netbotz Rack Monitor 750 is reserved for future use. So you can NOT use the USB ports for Modems and Sea Level I/O devices as per the manual.
Click here to view the Netbotz 750 appliance compatibility matrix.
Regards,
Bala
(CID:143760183)
Posted: 2020-07-05 07:30 PM
This comment was originally posted on DCIM Support by Kevin Kolobe on 2019-05-22
Thank you Bala.
(CID:143760200)
Posted: 2020-07-05 07:30 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.