Netbotz - 48 Port Brick

[DCIM_Support]

I would like to inquire an alternate to Sea Level USB to TTL Digital Interface port brick for Netbotz 570 device? Based in South Africa so looking for something readily available as Netbotz does not have its own device for this requirement?

(CID:110793301)

[DCIM_Support · Accepted solution]

Hi Gary,

The only Sealevel products we support are listed below. This is from our KBase FA158456. 
I am not aware of any alternatives, but someone else might have more input on this. 

To increase the number of I/O sensors that can be connected to your NetBotz appliance, the following USB digital I/O devices are supported:

Sealevel SeaLINK PIO-48 - Part number 8203 only - (adds 48 digital I/O connections)
Sealevel SeaI/O 462U (adds 96 digital I/O connections)
Sealevel SeaI/O 463U (adds 96 digital I/O connections)
Sealevel SeaI/O 450U (adds 16 digital I/O connections) 

Regards

(CID:110793308)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.