NetBotz Rack Monitor 750 Modbus RS485 port Reserved for future use

DCIM_Support · ‎2020-07-06

This question was originally posted on DCIM Support by Semih K. on 2019-12-17

Hello,

NetBotz Rack Monitor 750 has Modbus RS485 port but Installation and Quick Configuration manuel (990-91106D-001 Publication Date 8/2019) says "Modbus RS485 port Reserved for future use"

When can we use Modbus RS485 port? Is there any near date?

Thanks

DCIM_Support · ‎2020-07-06

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-12-17

Hi Semih K.,

We do not have a firm date at this point in the modbus development for the 5.x NetBotz. From what I've heard from product management, they're looking to add it to the system for 2020 but again, there's nothing firm.

Thanks,

Steve

See Answer In Context

DCIM_Support · ‎2020-07-06

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-12-17

Hi Semih K.,

We do not have a firm date at this point in the modbus development for the 5.x NetBotz. From what I've heard from product management, they're looking to add it to the system for 2020 but again, there's nothing firm.

Thanks,

Steve

DCIM_Support · ‎2020-07-06

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.