Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hi Paul,
DCO 7.5 onward we support placement of shelf mounted equipment as well. Follow these steps:
- Look for "Shelf" in genome & drag it to the rack where your tape drives are.
- Make sure that the Tape Drive in Genome has "Shelf Mounted" mounting checked in under it's property. If you do not find this device, create a generic one & provide the exact dimensions.
- Place the device over the shelf as per the actual placement.
Link copied. Please paste this link to share this article on your social media post.
Hi Paul,
DCO 7.5 onward we support placement of shelf mounted equipment as well. Follow these steps:
- Look for "Shelf" in genome & drag it to the rack where your tape drives are.
- Make sure that the Tape Drive in Genome has "Shelf Mounted" mounting checked in under it's property. If you do not find this device, create a generic one & provide the exact dimensions.
- Place the device over the shelf as per the actual placement.
Link copied. Please paste this link to share this article on your social media post.
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.