EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-02-06 05:19 PM
Hi all, I'm looking for a Modbus register map for reading data from an Easy UPS which is connected to the network with an E3SOPT001 Simple Network Management Protocol Card (SNMP DA807). Anyone know where this information can be found?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-02-07 12:20 AM . Last Modified: 2022-02-07 12:26 AM
Hello Philip
I've done a bit of digging on your behalf
Please see the attached excel sheet.
If this is the information you needed, please mark the post as solved.
Best regards
Tonny
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-02-14 01:49 AM . Last Modified: 2022-02-14 08:44 PM
@TonKei www.mcdvoice.com wrote:Hello Philip
I've done a bit of digging on your behalf
Please see the attached excel sheet.
If this is the information you needed, please mark the post as solved.
Best regards
Tonny
The solution worked for me thanks to the community and the members for the solution.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-01-12 02:25 PM
Hello Sir
Did you able to find the DDF for this register map
If so please share the information
Regards
Jyoti
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-02-13 02:54 AM . Last Modified: 2023-02-13 04:59 AM
Hello Sir,
I'm configuring SNMP OIDs of the Easy power 3S Schneider e I'm looking for the tags for current or power input and output Can you help me?
Regards
Maxe74
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.