EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-06 12:54 AM . Last Modified: 2024-04-02 11:24 PM
Hi,
I have performed tests by activating and deactivating dry contacts
on this card (W0P2370) and they do not respond (they do not change state).
We have also generated alerts to the air conditioning unit giving the same result.
What other diagnosis or verification can I make to know what the problem is?
What do you recommend me to do?
regards
(CID:153554642)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-06 12:54 AM . Last Modified: 2024-04-02 11:24 PM
Dear Fabio Díaz,
It may be better to ask this question over at the APC hardware forums: https://forums.apc.com/
If you have more questions, please ask.
With respect.
(CID:153554699)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-06 12:54 AM . Last Modified: 2023-10-22 02:59 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.