Is it possible to add Netbotz camera 165 in DCE ?

[DCIM_Support]

This question was originally posted on DCIM Support by Michel Berthiaume on 2019-05-17

---

We bought a netbotz camera 165.

my question is ... is it possible to add this camera in DCE appliance ?

Regards

(CID:143759112)

[DCIM_Support]

This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2019-05-17

---

Dear Michel,

Netbotz Camera Pod 165 is compatible with NBRK0750. The Current NBRK0750 firmware version 5.1.0. Here is what I have found for you in the NBRK0750 Release Notes:

DCE Support for camera feeds is planned for a future release. I do not have an ETA. If this feature is made available in the future releases, then the necessary release notes will have this information confirming the camera feeds support in DCE for Netbotz Camera Pod 165. 

Regards,

Bala

(CID:143759131)

[DCIM_Support]

This comment was originally posted on DCIM Support by Steven Marchetti on 2019-05-17

---

Just to add to Bala’s response, the NetBotz appliance will need to have 5.2 firmware and DCE will need to be at 7.7. Neither are yet available but both should be out some time this year. 

Steve. 

(CID:143759145)

[DCIM_Support]

This comment was originally posted on DCIM Support by Jakub Porebski on 2019-06-06

---

Hopefully not in December 😉

(CID:144867363)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.