Import cabling

DCIM_Support · ‎2020-07-04

Hello,

I can not create a device with multiple network links.

When importing, I have the equipment but with only the first link.

File import : https://drive.google.com/open?id=1NvJOTYZArK9yUW7Hdczc8hpe6jeVjWF_

DCIM_Support · ‎2020-07-04

Hi!

Your file filled incorrectly. Your file describes only one connection. To add another one you need to create new columns with network properties - Network From Module Name 2, Network From Type 2 and so on for each network interfaces.

And then you need to move data from rows 3-10 to corresponding columns.

See Answer In Context

DCIM_Support · ‎2020-07-04

Hi!

Your file filled incorrectly. Your file describes only one connection. To add another one you need to create new columns with network properties - Network From Module Name 2, Network From Type 2 and so on for each network interfaces.

And then you need to move data from rows 3-10 to corresponding columns.

DCIM_Support · ‎2020-07-04

You are a genius 😂

It's done thanks for your help.

DCIM_Support · ‎2020-07-04

You are welcome! 😀

DCIM_Support · ‎2020-07-04

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.