EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2020-07-04 05:53 PM
This question was originally posted on DCIM Support by Wes Burhoe on 2018-05-21
Hi all, We typically go through proxy... but if we choose to setup IT Gateway to send data to the could directly, is there a list of host names we would use? for getting firewalls opened up, etc.
(CID:131963302)
Posted: 2020-07-04 05:53 PM
This answer was originally posted on DCIM Support by spezialist on 2018-05-21
Dear Wes Burhoe,
The answer to your question can be found on page https://ecostruxureit.com/system-requirements/:
Firewall
- Port 443 TCP outbound
- To connect using static IPs, add 40.84.62.190 and 23.99.90.28
If you have any further questions, please ask.
With respect.
(CID:131963320)
Posted: 2020-07-04 05:53 PM
This answer was originally posted on DCIM Support by spezialist on 2018-05-21
Dear Wes Burhoe,
The answer to your question can be found on page https://ecostruxureit.com/system-requirements/:
Firewall
- Port 443 TCP outbound
- To connect using static IPs, add 40.84.62.190 and 23.99.90.28
If you have any further questions, please ask.
With respect.
(CID:131963320)
Posted: 2020-07-04 05:53 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.