Easy UPS SNMP MIB File Extraction Procedure?

DCIM_Support · ‎2020-07-05

Hi

We have two 20 KvA easy UPS with external batteries having 2 SNMP Card Part Number E3SOPT001. Can Some help me regarding this for extracting MiB File from UPS?

As we have siemen BMS system that need to be configured with UPS that needs MiB's Browser to do this?

can any one help on this by telling the whole procedure as easy ups is newly launched product by apc and i don't get much knowledge of this on their website regarding this ?

thanks

DCIM_Support · ‎2020-07-05

Hi Nisar,

Single phase Easy-UPS units use the generic UPS mib RFC1628. 3 phase UPS units use the mib I have attached. I have asked for a link but apparently we don't have one yet so I'm just sending the file.

Steve

EasyUPS3S10-40kVA-DY802.mib

See Answer In Context

DCIM_Support · ‎2020-07-05

Hi Nisar,

Single phase Easy-UPS units use the generic UPS mib RFC1628. 3 phase UPS units use the mib I have attached. I have asked for a link but apparently we don't have one yet so I'm just sending the file.

Steve

EasyUPS3S10-40kVA-DY802.mib

DCIM_Support · ‎2020-07-05

Dear Nisar Ahmed ,

Tell us, please, did you solve your question or not?

With respect.

DCIM_Support · ‎2020-07-05

Hi Steve

i have already resolved the issue thanks for you kind support

DCIM_Support · ‎2020-07-05

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.