Direct web link to a specific device in DCO web client

[DCIM_Support]

Hi Team,

Is it possible to get a direct link that would allow (when clicked on) open DCO web client and after providing login credentials display a specific device in the rack elevation diagram?

It would act somewhat similar to a pre-configured search&display for that device within DCO.

Customer would like to use such direct web link to re-direct users from another system to DCO Web Client and display the device in question in its rack position.

(CID:133372378)

[DCIM_Support]

You can open up the rack view in the web client, by using the GUID identifier in the URL:

https://40.74.55.xxx/web/#/inventory/rack/a2d7918e-7cc4-4de9-a869-9d89981aa6f7

If you add the link to a custom property in the DCO native client then you're almost there. I don't think there is a link directly to the IT assets.

Hope this can help.

(CID:133372701)

[DCIM_Support]

Thank you Christian,

That is very helpful.

Does anyone else know if there would be a way to have a direct link to a device inside of the rack? Ideally our customer would like to use a single link that will direct them straight to a DCO Web Client with a particular device already highlighted and properties of the device displayed.

(CID:134023192)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.