DCO Offline Demo - Simulate Alarms

[DCIM_Support]

This question was originally posted on DCIM Support by Iván González Borraz on 2018-01-29

---

Hi all,

In the DCO Offline Demo, Is it possible to create simulated alarms?

The objective is to teach the clients in a Demo the possibilities of the Alarms functionality in DCO. (Locate element with alarm in Show in Layout, impact scenario, etc.)

Something similar to the attached image of a DCO (non Offline)

Thanks,

(CID:128748237)

[DCIM_Support]

This comment was originally posted on DCIM Support by Iván González Borraz on 2018-01-31

---

any ideas?

(CID:128753187)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Ed Tarento on 2018-02-02

---

Hi 

I recall the DCO Offline system had a feature to simulate an alarm but I may have been mistaken and I can't find it in the 8.2.2 version.  (perhaps I was thinking of Simulate Impact).  The option "Demo Tools -> Add alarms to devices" creates alarms but I see them not being for devices whose names appear in DCO so you can't launch to the device in DCO.

I'm trying to get a  which may help 

I hope that helps

(CID:128750787)

[DCIM_Support]

This comment was originally posted on DCIM Support by Iván González Borraz on 2018-02-02

---

Thank you very much

I'll try what you say, and I'll go back on the post.

(CID:128753184)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.