EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 02:16 PM . Last Modified: 2024-04-05 02:41 AM
Dear Schneider Team.
We are currently using DCO LAB to determine the best available rack to install servers. We have used the option that automatically indicates the best position and wonder what criteria the software uses to determine the most convenient rack.
Could you expand?
Thank you.
(CID:128756999)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 02:16 PM . Last Modified: 2024-04-05 02:41 AM
Hi Banco,
Thanks for posting here. You can visit http://sxwhelpcenter.ecostruxureit.com/display/public/UADCO8x/Working+with+Asset+Provisioning page where it shows what all criteria's are counted to find a best rack.
Or
Also you can use provisioning match overlay as shown in screenshot below which explains well what criteria's are satisfied to find a best rack to place an equipment.
Regards.
(CID:128757054)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 02:16 PM . Last Modified: 2023-10-22 01:38 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.