Sensor mapping

[DCIM_Support]

Hi team,

I am not able to find the sensor mapping menu in DCO 8.2. 

I am reading some old topics about this feature, but I do not find information in the online guide about this. 

Can you help me?

Thanks in advance.

(CID:128756845)

[DCIM_Support]

Hi Javier

before you have to Configure external system integration then

view and associate

(CID:128756875)

[DCIM_Support]

Hi Javier,

1-  Associate your DCE device (such as PDU) to your model in DCO.

2- In Planning Device Association mode, right click on model (in floor layout or in rack view), and select "Sensor Mapping" from  the displayed menu:

For other details, please see the following page:

Configuring branch circuit monitoring

Kind regards

(CID:128756877)

[DCIM_Support]

Thank you Jef,

I have associated a power meter to a PDU, but I would like to see the details of the power in the pop-up view.

Is it possible to see the measured load of a PDU as we can see in a UPS or in a rack PDU?

Regards

(CID:128757577)

[DCIM_Support]

Hi Javier,

You are most welcome,

I think if the associated device can get the power reading into DCO, then it should be possible to see the measured data in Power overlay tool-tip, and in device Properties > External Systems > Device.

Kind regards

(CID:128757603)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.