DCE Web API - WSDL

[DCIM_Support]

Dear All,

I am configuring a demo on DCO integration with VMware Vcenter with Vmotion enable. I face some problem when come to testing the VMware migration.

I try to configure the DCO react on the DCE threshold with SoapUI with the instruction below.

http:///nbc/ws/core/AlarmImpactConfigurationWebService?wsdl

It was show me an error message. As the pictures attached below.

Anyone could advice is the instruction I use correct?

Thanks & regards,

Daniel Oh

(CID:102924982)

[DCIM_Support · Accepted solution]

Hi Daniel,
I'm not sure how you want DCO should react on the DCE thresholds, but I guess what you really might need is the DCO-PRO Pack-enabled management setup. For more information please visit the following pages:
http://dcimsupport.apc.com/display/UAOp74/StruxureWare+Data+Center+Operation%3A+PRO+Pack
http://dcimsupport.apc.com/display/UAOp74/VMware+integration+enabling+migration+of+virtual+machines+...
Kind regards

(CID:102925025)

[DCIM_Support]

Hi Jef, Thank you for the reply. We have solve the issue. Actually we are trying to simulate the DCO and VMware integration. In order to trigger the VMware to activated the Vmotion to transfer the Virtual machine from one host to the other healthy host. Best regards,

(CID:102925179)

[DCIM_Support]

Hi Daniel, You are welcome, many thanks for taking the time to share the info. Kind regards

(CID:102925199)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.