Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84322members
353483posts

DCE Status = Unplugged

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

DCIM_Support
Picard
Picard
0 Likes
1
142

DCE Status = Unplugged

This question was originally posted on DCIM Support by Luciano Fiocco on 2019-12-02


Hello all. I know this issue has come up before, but never answered. We have a device that stays connected to DCE, Link is up. But the device is not reporting any values. Status = Unplugged.

 

There has to be a way to arm this on devices, or trigger and alert. Please don't ask me to open a DDF request and modify DDF's. If this is the case it would take 34 new DDFs. 

Is there an option for this? or can we please add this feature if not included?

(CID:152080759)

1 Reply 1
DCIM_Support
Picard
Picard
0 Likes
0
142

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.