DCE NFS Mount Failure

[DCIM_Support]

This question was originally posted on DCIM Support by Ed Krimmer on 2018-05-14

---

I am currently mounting an NFS share and utilizing it for backups. I wish to setup an NFS share on a different server and believe I've done so - mirroring the one that is operational. However, DCE cannot Test Mount it. Are there any gotchas I've forgotten?

DCE 7.5.0.62

Ed

about?

(CID:131959965)

[DCIM_Support]

This answer was originally posted on DCIM Support by spezialist on 2018-05-14

---

Dear Ed Krimmer,

From your screenshot: try changing the Protocol from UDP to TCP. And check, please, it is possible for your NFS resource to specify a Subdirectory as well?

For example, in my answer in topic  on a similar question there is a screenshot of a practically verified configuration.

With respect.

(CID:131959999)

[DCIM_Support]

This comment was originally posted on DCIM Support by Ed Krimmer on 2018-05-14

---

Thank you. I tried your suggestions to no avail. Here is a screenshot of the functioning configuration - only difference is the server IP. The NFS sharename is simply "dcebackup" as specified. I can only think I'm missing something on the server side but coming up blank.

(CID:131963703)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-05-15

---

Dear Ed Krimmer,

Ok, very good that you have got to make NFS mount 😀.

With respect.

(CID:131963706)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2018-05-29

---

Dear Ed Krimmer,

Tell us, please, could you solve your problem or not?

With respect.

(CID:131966522)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.