EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-03-14 04:53 AM
This question was originally posted on DCIM Support by Miguel Gonçalves on 2019-06-26
Hello
The dce was running without problems. We changed the ntp server configuration and time zone through the client. After saving the changes, a message appears to restart the server. After this process we never get access via web or client.
DCE 7.2.4 is running in vmware. In the vmware console we were able to verify that the DCE started without errors.
I am checking in the it manager if there has been any change in the network (domains, firewall, etc).
In attached i send some print screen.
I restart DCE and i can see that httpd service fail to start.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-03-15 04:24 AM
Hi @fbernal_transfe,
I think the root cause here is going to be the fourth line in your first screenshot - the line ending "no space left on device". I suspect we have a partition full, and the reboot has unearthed this - I don't think the time is the cause, it's just what gave you reason to reboot.
To resolve this, it'd be best if you contact your local support - we'll need to arrange for either onsite service or remote support to help recover from this. Luckily it looks like you have remote access (or a vmware console), which makes this much easier.
Regards,
Shaun
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.