EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2021-02-08 04:07 AM
Hi,
we try actually to monitore Cooling crac unit "Uniflair TDAV0921 -pcowebcard" with HP NNMI software (HP Netwok monitoring system).
the oids included in the loaded MIB file are only variables also the alarms like (Smoke Fire...), there is no recognized oid as alarms notification.
is there updated MIB file included structure of oid with alarms notification with different level sevirity?
Posted: 2021-02-15 03:37 AM . Last Modified: 2021-02-15 03:44 AM
Hi Chafik,
Unfortunately, it seems you have posted your request in wrong forum. This channel is not supporting HP NNMI software (it is not our product), I think the proper forum might be the community at hpe.com (https://community.hpe.com/)
Kind regards,
Jef
Posted: 2021-02-19 10:53 AM . Last Modified: 2021-02-21 04:46 AM
The pCOWeb card is used to interface the pCO system to networks that use the HVAC protocols based on the Ethernet physical standard such the SNMP. The problem with this card is that the implementation is based on the final manufacturer of the HVAC.
Posted: 2021-02-22 09:39 AM
This article might give you some insight:
https://dcimsupport.ecostruxureit.com/hc/en-us/articles/360014775598-Carel-pCOWeb-cards
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.