DCE unable to retreve NetBotz 750 SNMP Device settings

Mike-Sutton · ‎2021-02-24

Hi Im using DCE 7.8.1 and trying mass config on multiple 750's FW 5.2.4.15 but keep getting unable to retreve SNMP device settings.. only on the 750's i have tried both root and superuser profiles both FTP and SCP see screengrab below.

Am i missing something????

TIA

Mike

APC_Steve · ‎2021-02-24

Hi @Mike-Sutton ,

DCE does not as of yet have the ability to mass configure the NetBotz 750/755 units.

I believe they're looking to add that functionality later this year but please don't hold me to that ETA.

Thanks,

Steve

See Answer In Context

Constantin · ‎2021-02-24

dear Mark
Is the DDF of the netbotz 750 installed?
Do you have an error message on the DDF?

Regards!

Mike-Sutton · ‎2021-02-24

Hi @Constantin yes the DDF is installed and i have no error messages

Mike-Sutton · ‎2021-02-24

APC_Steve · ‎2021-02-24

Hi @Mike-Sutton ,

DCE does not as of yet have the ability to mass configure the NetBotz 750/755 units.

I believe they're looking to add that functionality later this year but please don't hold me to that ETA.

Thanks,

Steve

Mike-Sutton · ‎2021-02-24

Cheers @APC_Steve