AP9361 PX HID controller clock running slow

[DCIM_Support]

Any reason why the on board clock of an AP9361 PX HID controller should be running very slow?

It seems to lose about 40 mins every 1 hour.

NTP sync works but at this rate of time loss, NTP is not very effective...

Thank you

(CID:120132598)

[DCIM_Support]

Hi Garry Priestland, thanks for posting.

Let's see who can be of assistance here. @community any ideas?

Kind regards Ditte 

(CID:120134331)

[DCIM_Support]

Hi Gary,

Sorry to leave you hanging.
I hope you found answer. 

Kind regards,

 Stine

(CID:128754255)

[DCIM_Support]

No answer - just appears to be faulty hardware...

(CID:128756343)

[DCIM_Support]

Oh OK, thanks for letting us know 😀

(CID:128756634)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.