ABB G13 Gateway

DCIM_Support · ‎2020-07-03

Hi Everyone;

I need DDF file for ABB G13 Gateway,

DCIM_Support · ‎2020-07-03

Hi Alper,

You can get a DDF or get one created by either choosing the "Add My Device" option at the top of the page or by e-mailing multivendorsupport@apcc.com. That being said, you usually do not get a DDF for a gateway. The gateway is normally a simple translator for a modbus serial device residing on the other side of that gateway. Although I'm not familiar with the gateway you suggest, it would usually be that device that would require a DDF. Also, the gateway in question has not been officially tested so unless someone else on the forum has any experience with it, I can say that any gateway should work but we can't guarantee it.

Steve

See Answer In Context

DCIM_Support · ‎2020-07-03

Hi Alper,

You can get a DDF or get one created by either choosing the "Add My Device" option at the top of the page or by e-mailing multivendorsupport@apcc.com. That being said, you usually do not get a DDF for a gateway. The gateway is normally a simple translator for a modbus serial device residing on the other side of that gateway. Although I'm not familiar with the gateway you suggest, it would usually be that device that would require a DDF. Also, the gateway in question has not been officially tested so unless someone else on the forum has any experience with it, I can say that any gateway should work but we can't guarantee it.

Steve

DCIM_Support · ‎2020-07-03

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.