Make Netbotz use same measurement units as DCE or able to switch them

[DCIM_Support]

Please make the next version of Netbotz software able to switch temperature units  (Fahrenheit, Celsius...) without the need to change computer's region.

Moreover when the OS (Win 10) gives the chance to have US region and measurement units as Metric or Imperial.

By the way, we also have the DCE 7.2.0 as English (METRIC) configured in our system and it is connected to the appliance, but the Netbotz 4.6.2 stubbornly stays in Fahrenheit (since region is US). Shouldn't both follow the same criteria?

(CID:130092795)

[DCIM_Support · Accepted solution]

Hi David Gomez,

Thanks for posting! If you'd like to turn your post into a feature request you can do that here: Feature requests

Thanks,

Stine

(CID:130681698)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.