Device association of Port shared rack PDU

[DCIM_Support]

Hello,

Our customer has lots of PDU's which connected via port sharing. I discovered all the devices. I can get all the data from all 4 PDU's like in the screenshot below.

However, when I try to associate them on DCO I can only associate 1 device. Our customer wants to see all measured data from PDU's. And they want to see it from DCO. How can I associate other 3 PDU's?

Thanks in advance,

(CID:134030392)

[DCIM_Support]

Dear Erhan Yasar,

I hope you will find useful answers from Jef Faridi and Ed Tarento to your question from a similar topic .

Unfortunately:

And concerning the Network port sharing, that is currently not supported in DCO.

A possible work-around might be through ETL integration (custom solution).

With respect.

(CID:134030463)

[DCIM_Support]

Dear Erhan Yasar,

Tell us, please, did you solve your question or not?

With respect.

(CID:134680028)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.