Virtual ViewX running on Windows Server 2025

[jirirk]

Hello,
I would like to ask whether anyone has experience of running a Geo SCADA server and a Virtual ViewX server (on the same machine) on Windows Server 2025.

I am having some issues with the VVX server (After user login a user will see the spinning Virtual ViewX graphic only).
Thank you!

[AdamWoodlandToo]

Assuming you're using dynamic users, check:

1. The user gets created in Windows

2. The user gets logged in (see in Task Manager)

Those are the first two hurdles that usually trip VVx setups up

[tfranklin]

I've seen some delayed logins in VVX in GS 25 so maybe this is related.  We've seen it in the past and it seems like the session almost gets lost before displaying ViewX to the user.  Hitting F5 / refreshing the page will allow the user to connect.  Not sure what causes the initial delay though.  Still investigating myself.  Should also mention that in my case VVX is almost always on a separate server.  I'd encourage the route we're going and contact support.  They're usually very helpful with this stuff.