HOW TO LINK A PROGRAM TAG AKA LOCAL TAG (Not a Controller Tag) FROM RSLOGIX 5000 using Ethernet IP Driver

[CoryMelaleuca]

I could not find anything on the Schneider forums for how to do this. It took a lot of digging and trial and error, but the solution was somewhat simple. It's unfortunate that you cannot auto-browse the program tags, but there is a work-around by keying the tags manually using the following syntax:

Type the word Program followed by a colon. Then you type the name of the program within a timed task followed by a period. Then you type the name of the tag. See the picture attached.

[sbeadle]

The help page does describe this.

Online at: https://tprojects.schneider-electric.com/GeoSCADAHelp/Geo%20SCADA%202022/Default.htm#EtherNetIPDrive...