Niagara R2 Enterprise Server IP Address Change Not Retained in Admin Tool

[Product_Support]

Issue

When attempting to modify the IP address of a Niagara R2 Enterprise Server using the Admin Tool, the new IP address values entered in the Network Settings tab are not saved.

Product Line

TAC IA Series

Environment

Niagara R2

Cause

The Admin Tool’s Network Settings tab for a server station is read-only. Updating the IP address in Windows is sufficient; changes in Admin Tool are not required and will not persist.

Resolution

• Configure the new IP address directly in the Windows network settings.
• Do not attempt to update the IP address in the Admin Tool Network tab, as it does not store changes for server stations.
• Treat the Network tab in Admin Tool as informational only for Enterprise Server configurations.