how to configure Listview in Ecostruxure Machine SCADA Expert

[Foong]

New to "Ecostruxure Machine SCADA Expert". I need to list  events dynamicly in a view. I found .NET control has a form called" System.Windows.Forms.Listview" But I don't know how to configure it to show my data.

I really need help.

Thank you in advance.

[Juliaann]

---

@Foong wrote: official site

New to "Ecostruxure Machine SCADA Expert". I need to list  events dynamicly in a view. I found .NET control has a form called" System.Windows.Forms.Listview" But I don't know how to configure it to show my data.

I really need help.

Thank you in advance.

---

A network containing logic controllers, SCADA systems, PCs, HMI, switches, ... Two kinds of topologies are supported:  flat: all modules and devices in this network belong to same subnet.  2 levels: the network is split into an operation network and an inter-controller network. These two networks can be physically independent, but are generally linked by a routing device. Represent computers of the control room on which SCADA systems or Control Expert are running. They are connected to the control and/or operation network and belong to level 2 of process control systems as defined by the ISA95.00.01 standard. The Modicon M262 Logic/Motion Controller implements both client and server services so that it can initiate communications to other controllers and I/O devices, and to respond to requests from other controllers, SCADA, HMIs, and other devices