Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the Schneider Electric Community! We have moved to a new address: community.se.com — bookmark it today and contact SchneiderCommunity.Support@se.com if you have any questions!
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82695members
350420posts

rear panel data output 9 pin connector...

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
larrya_apc
Cadet
0 Likes
2
128

rear panel data output 9 pin connector...

This was originally posted on APC forums on 4/30/2009


Greetings...
A couple years ago, I got some ups's from a surplus dealer....
On the back on one of the APC units, model number 1400, there is a 9 pin connector....
Can someone tell me which pins are used and the specs on the data flow...
baud rate, and what data is sent....
Larry ve3fxq


Accepted Solutions
voidstar_apc
Janeway
Janeway
0 Likes
0
128

Re: rear panel data output 9 pin connector...

This was originally posted on APC forums on 5/1/2009


If you're talking about a 9 pin RS232 port, this knowledge base article might help: [What are the computer interface port specifications for the 3G Smart-UPS family?|http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_faqid=1481]

See Answer In Context

2 Replies 2
BillP
Administrator Administrator
Administrator
0 Likes
0
128

Re: rear panel data output 9 pin connector...

This reply was originally posted by Angela on APC forums on 4/30/2009


hi larry

it is a proprietary pinout. our official recommendation would be to use a 940-0024 or 940-1524 APC serial cable with the UPS. if you have a specific reason of why you need this, you can contact tech support via phone or email (esupport@apc.com or 800-890-4272) to make an official request so that APC can provide the information to you after validating the request.

voidstar_apc
Janeway
Janeway
0 Likes
0
129

Re: rear panel data output 9 pin connector...

This was originally posted on APC forums on 5/1/2009


If you're talking about a 9 pin RS232 port, this knowledge base article might help: [What are the computer interface port specifications for the 3G Smart-UPS family?|http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_faqid=1481]