APC UPS for Home and Office Forum
Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-23 02:56 AM . Last Modified: 2024-04-23 03:44 PM
Hello
My UPS died and i replaced it with a BackUPS that was in another location.
I have tried but there are some things i had lived with not sure i can get them here.
1. I used to get 6 + hours on the previous 900w UPS for some of my stuff a router and switch would usually wind down the session. How can i calculate this from my battery Ah value for a back ups 1500
2. I usually switch off everything at 10pm and auto start at 5am i had achieved this by having the ups start on power restore and achieve power restore using a smart switch on a schedule. I did not see an option to start on power restore on powerchute serial. Also did not see an option to switch off the UPS
3. Can i give the UPS the AH of the attached batteries for it to calculate how long it can last?
4. I bought a usb cable and after a few uses it just died and tells me unknown device. What could be issue cable or port before i buy another cable
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-24 10:20 AM
You’ll need to provide a lot more information as to the specific APC UPS model that was used vs what’s in place now as a starter. 👍
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-25 12:25 AM
Its a Competitor UPS is that Allowed?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-26 03:29 AM . Last Modified: 2024-04-26 03:30 AM
You’re free to discuss whatever you like but understand there may not be very many specific answers given.
Since the unit is a third party UPS and we may not be familiar with all the features and possible options.
Regardless, asking is free so ask. 👍
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-29 08:18 AM
Ok it was a triplite ups setup with their software called Powerchute connected via Usb cable.
I had configured it to power up on power restore it had an option to power down the ups and connected devices with a timer so all i had to do was switch off power before timer finished and if i restored power the ups would auto start.
The serial app is missing this feature
I cant switch off the UPS from the software
In case of power loss i could reserve power by switching of ups when i dont need via software if power came back ups would power up if i wanted to use i manually turn it on. Loved this since i could turn it off when not at home get home tun on and work for a bit before totally draining UPS.
So i ask are this available esp the ups swith off capability
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.