Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Send a co-worker an invite to the Exchange portal.Just enter their email address and we?ll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Hello, community members! I'm wondering if anyone has advice or experience with shutting down servers without impacting the outlets they are network address connected to. Specifically, I'm looking to p...
I have a battery that just died and won't shut up, so I was going to get new batteries for all (I had 5 critical ones through the house. But first, it would take time and I wanted to get at least one f...
I placed the cartridge for my J10 in my S10 and the harness was damaged. A full replacement RBC108 cartridge to get a new wiring harness is $200+ so I am wondering if I can get a replacement wiring har...
So, I'm doing a little homelabbing. (Collective groan from the pro's, I'm sure.)I have a Dell PowerEdge R630 server. I also bought an APC AP5717 19" rackmount KVM off eBay.I found out that I apparently...
MyModel P11VT3 surge protector that has coax isolation fried my cable modem and WiFi router by putting apotentialon the coax high enough to fry my equipment. Theprotector is 5years old.Iwould like to c...
My APC Line-R 1200 voltage regulator is seeing an input of 125VAC from the wall outlet. We usually see 121-123VAC, with 122VAC being the most common.The High Input light is steady amber.The output volt...
I have a WIFI enabled surge protector that stopped connecting to the WIFI. I unplugged for :30 and the green light comes on, but it never goes to red. I do have a 2.4G wireless network enabled.
I have been an APC partner for more than a decade and ACCIDENTALLY found out that a product that's in various client sites is going to be EOL in a little over a year.No announcement on my Partner Porta...
I have been a long time APC fan but i'm having an issue that i'm hoping someone has found a way to fix or get around.Whenever there is a power event I just get "UPS: On battery power in response to dis...
Hello everyone,I just want to reconfirm if this card is dead before ordering a new oneWe have the SMX1500rm2U for sometimes and my friend gave me his old, used AP9631 (NMC 2). He told me it's been unus...