Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82153members
349710posts

UTS6BI only 4 120v circuits?

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
HjMiami_apc
Cadet
0 Likes
1
80

UTS6BI only 4 120v circuits?

This was originally posted on APC forums on 6/12/2016


I just bought a UTS6BI to use with my EU2000i but as I'm reading the manual it appears as if this ATS is only good for 4 120v circuits. Is this correct??

I really hope there's a way around this cause I don't have any 240v circuits to power with my little Honda.

Anybody have any info that I may not be aware of?

I'd really like to use 6 120v circuits.

Tags (2)

Accepted Solutions
wayne_i_apc
Lieutenant
Lieutenant
0 Likes
0
80

Re: UTS6BI only 4 120v circuits?

This was originally posted on APC forums on 6/13/2016


Your "best" option would be to exchange the UTS6BI for a UTS6H. You are correct, the "BI" models provide 1 240v circuit using 2 UTS circuits, and the remaining circuits are 120v (4 for a UTS6BI, 8 for a UTS10BI). These units also expect the generator connection to provide 240v. The UTS6H is intended for a 120v generator input, and all 6 circuits are 120v.

See Answer In Context

1 Reply 1
wayne_i_apc
Lieutenant
Lieutenant
0 Likes
0
81

Re: UTS6BI only 4 120v circuits?

This was originally posted on APC forums on 6/13/2016


Your "best" option would be to exchange the UTS6BI for a UTS6H. You are correct, the "BI" models provide 1 240v circuit using 2 UTS circuits, and the remaining circuits are 120v (4 for a UTS6BI, 8 for a UTS10BI). These units also expect the generator connection to provide 240v. The UTS6H is intended for a 120v generator input, and all 6 circuits are 120v.