UPS for Antec P190+1200

Anonymous user · ‎2021-06-28

Hi there,

I have an Antec P190 Case that has 2 power supplies. One 650Watts and the other 550Watts.

I have a dilema. Should I buy 2 UPS to cover the 2 power supplies? Or, is there something not to expansive that would cover the 2 power supplies and give max 10min of uptime?

Any suggestions are greatly appreciated.

Martin.

Message was edited by: Martinus

EZ_Button_apc · ‎2021-06-28

You could possibly get away with 1 1500va UPS like a BR1500LCD or an SUA1500 ups. Usually you're not going to pull the full capacity of the power supplies, so you may want to check at what % or amount you will be pulling. (even on start-up)

That'll let you know if the ratings are within the limit of a 1500.

See Answer In Context

EZ_Button_apc · ‎2021-06-28

You could possibly get away with 1 1500va UPS like a BR1500LCD or an SUA1500 ups. Usually you're not going to pull the full capacity of the power supplies, so you may want to check at what % or amount you will be pulling. (even on start-up)

That'll let you know if the ratings are within the limit of a 1500.