Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84568members
353835posts

UPS APC BH500INET Transfer to battery reporting

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
BillP
Administrator Administrator
Administrator
0 Likes
3
126

UPS APC BH500INET Transfer to battery reporting

This question was originally posted by Tomas on APC forums on 3/14/2012


Another and the last question about BH 500 INET 🙂

Is this UPS capable of reporting "using battery" condition (AKA "blackout condition")? I mean any kind including SNMP trap, serial APC's "simple signaling", dry contact on device etc.

It is sad that this handy device, equipped by ethernet interface and switchable outlets probably does not support such simple feature. Not mentioning missing telnet interface and non-upgradable firmware 😞


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
126

Re: UPS APC BH500INET Transfer to battery reporting

This reply was originally posted by Angela on APC forums on 7/1/2013


BH500INET does not support SNMP.

See Answer In Context

3 Replies 3
BillP
Administrator Administrator
Administrator
0 Likes
0
126

Re: UPS APC BH500INET Transfer to battery reporting

This reply was originally posted by Jonathan on APC forums on 3/19/2012


Unfortunately the features that you were looking for are not available on this device.

wies-it_apc
Cadet
0 Likes
0
126

Re: UPS APC BH500INET Transfer to battery reporting

This was originally posted on APC forums on 7/1/2013


hello.

is it possible to poll informations via SNMP? (for example with snmpget, no traps)

regards stefan

BillP
Administrator Administrator
Administrator
0 Likes
0
127

Re: UPS APC BH500INET Transfer to battery reporting

This reply was originally posted by Angela on APC forums on 7/1/2013


BH500INET does not support SNMP.