Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hi,
The default setting is to restore power to the outlet group when AC returns. If you are running PowerChute 9.5 or 10 you will find the setting under Shutdown - Outlet Sequence
Link copied. Please paste this link to share this article on your social media post.
Hi,
The default setting is to restore power to the outlet group when AC returns. If you are running PowerChute 9.5 or 10 you will find the setting under Shutdown - Outlet Sequence
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.