Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Help
Help
Ask the Community Community Guidelines Community User Guide How-To & Best Practices Contact Support
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84525members
353765posts

Power Draw

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved Go to Solution
Back to APC UPS for Home and Office Forum
Solved
GaGT_apc
Cadet

Posted: ‎2021-06-29 09:41 PM

0 Likes
1
88

Posted: ‎2021-06-29 09:41 PM

Power Draw

This was originally posted on APC forums on 2/18/2011

If I have say a 100kw UPS powered up but no load connected, how much load will it draw on line feed?

Reply

Accepted Solutions
BillP
Administrator Administrator
Administrator

Posted: ‎2021-06-29 09:41 PM

0 Likes
0
88

Posted: ‎2021-06-29 09:41 PM

Re: Power Draw

This reply was originally posted by Angela on APC forums on 2/20/2011

it depends on a few factors with one major one being if the batteries are fully discharged/charging/fully charged, etc. also, the number of power modules installed will matter.

what model UPS or is this just a general question?

See Answer In Context

Reply
1 Reply 1
BillP
Administrator Administrator
Administrator

Posted: ‎2021-06-29 09:41 PM

0 Likes
0
89

Posted: ‎2021-06-29 09:41 PM

Re: Power Draw

This reply was originally posted by Angela on APC forums on 2/20/2011

it depends on a few factors with one major one being if the batteries are fully discharged/charging/fully charged, etc. also, the number of power modules installed will matter.

what model UPS or is this just a general question?

Reply
Invite a Colleague
Found this content useful? Share it with a Colleague!
Invite a Colleague
To The Top!

Forums

Knowledge Center

Events & webinars

Ideas

Blogs

Get Started