Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2804:48 AM. Last Modified: 2024-03-2701:29 AM
NS-1350 Fan cycles sporadically
I've bought a UPS 1350 about 6 months ago. It's been working great (and continues to do so), however recently, I've noticed that the fan will come on for a second and then go off maybe a few times in a row. Then once in awhile, it will run maybe for a minute and then go off. It hasn't done this before and I wondered if maybe they get dirt or dust built up in them? This unit sits on the floor next to my wall. Thanks.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2804:48 AM. Last Modified: 2024-03-2701:29 AM
Looks like a 43% load, 410W, and 109V when the fan is running. It's also reading 109V when the fan is not running. Do I have too many things plugged into it?
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2804:48 AM. Last Modified: 2024-03-2701:29 AM
Looks like a 43% load, 410W, and 109V when the fan is running. It's also reading 109V when the fan is not running. Do I have too many things plugged into it?