Monitoring two different UPS devices from one PC

Anonymous user · ‎2021-06-28

Hi all,

I have a BN1080G and a Be750G that I bought yesterday and installed today, running the USB to one computer. The computer is being protected by the BN1080G. The BE750G is protecting my modem, router and TV. When I look at the software - it only shows the BN1080G. Is there a way to be able to see the BE750G as well?

Thanks in advance,

Bob

BillP · ‎2021-06-28

Hi,

PowerChute Personal Edition is designed to monitor 1 UPS from a single PC communicating over USB. If you would like to periodically check the status of the BE750G you can swap the USB cable from the BN1080G to the BE750G and then move back after reviewing the status.

See Answer In Context

BillP · ‎2021-06-28

Hi,

PowerChute Personal Edition is designed to monitor 1 UPS from a single PC communicating over USB. If you would like to periodically check the status of the BE750G you can swap the USB cable from the BN1080G to the BE750G and then move back after reviewing the status.