Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82546members
350156posts

Is UPS Network Management Card 2 compatible with 802.1x?

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
roussyj_apc
Cadet
0 Likes
2
196

Is UPS Network Management Card 2 compatible with 802.1x?

This was originally posted on APC forums on 11/19/2013


I want to know if I can authenticate UPS Network Management Card 2 with 802.1x?


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
199

Re: Is UPS Network Management Card 2 compatible with 802.1x?

This reply was originally posted by Angela on APC forums on 11/22/2013


FYI, we are still looking at doing this long term but one suggestion I had was to see if a workaround, such as MAC Authetication Bypass (outlined at http://en.wikipedia.org/wiki/IEEE_802.1X) would work for your environment?

See Answer In Context

2 Replies 2
BillP
Administrator Administrator
Administrator
0 Likes
0
199

Re: Is UPS Network Management Card 2 compatible with 802.1x?

This reply was originally posted by Angela on APC forums on 11/20/2013


I believe the answer is no but I am trying to find out if there are plans for this coming in the future.

Update: Seems as though this is not set to be added in the near future but is on a long term roadmap eventually.

BillP
Administrator Administrator
Administrator
0 Likes
0
200

Re: Is UPS Network Management Card 2 compatible with 802.1x?

This reply was originally posted by Angela on APC forums on 11/22/2013


FYI, we are still looking at doing this long term but one suggestion I had was to see if a workaround, such as MAC Authetication Bypass (outlined at http://en.wikipedia.org/wiki/IEEE_802.1X) would work for your environment?