Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2804:26 AM. Last Modified: 2024-03-2701:44 AM
No. Without any communication port, there is no way for the UPS to signal the computer that it needs to shut down.
(The model you have is likely capable of communicating, and simply lacks the port. It's not worth invalidating your warranty or exposing yourself to a very real safety hazard by modifying it, especially when other models with communication capability are similarly priced to those without.)
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2804:26 AM. Last Modified: 2024-03-2701:44 AM
No. Without any communication port, there is no way for the UPS to signal the computer that it needs to shut down.
(The model you have is likely capable of communicating, and simply lacks the port. It's not worth invalidating your warranty or exposing yourself to a very real safety hazard by modifying it, especially when other models with communication capability are similarly priced to those without.)