Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82121members
349628posts

How do I mount rack ears on my H15?

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
dp2_apc
Cadet
0 Likes
3
214

How do I mount rack ears on my H15?

This was originally posted on APC forums on 3/24/2009


I just got a new APC H15 anf I'm ready to install in my A/V rack. The unit comes with rack ears and screws for rack mounting, and they are noted in the guide as included items but there is nothing in the guide on how to attach them to the unit nor does there appear to be any visable mounting holes on the unit itself. Can someone please describe how to attach them?


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
214

Re: How do I mount rack ears on my H15?

This reply was originally posted by Angela on APC forums on 3/26/2009


i checked on the side of ours.

see the attached screenshot of what i saw. i am seeing screw holes (on both sides) in the locations indicated by the arrows/red dots.

i think its clear where we should be looking but please confirm, or even better, let us know if you can take pictures of your set up so i can pass them along.

also, can you give me the first couple digits of your serial number which will indicate age? it should be something like PB0643 for example.

thanks!

See Answer In Context

Attachments
3 Replies 3
dp2_apc
Cadet
0 Likes
0
214

How do I mount rack ears on my H15?

This was originally posted on APC forums on 3/24/2009


I just got a new APC H15 anf I'm ready to install in my A/V rack. The unit comes with rack ears and screws for rack mounting, and they are noted in the guide as included items but there is nothing in the guide on how to attach them to the unit nor does there appear to be any visable mounting holes on the unit itself. Can someone please describe how to attach them?

dp2_apc
Cadet
0 Likes
0
214

Re: How do I mount rack ears on my H15?

This was originally posted on APC forums on 3/26/2009


thanks, for the reply. There are no visable mounting holes, but there appears to be a small rectangular plastic cap on each end of the front faceplate, however I've not tried to pry them off for fear of damaging it and/or being wrong. let me know what you find out. thanks

BillP
Administrator Administrator
Administrator
0 Likes
0
215

Re: How do I mount rack ears on my H15?

This reply was originally posted by Angela on APC forums on 3/26/2009


i checked on the side of ours.

see the attached screenshot of what i saw. i am seeing screw holes (on both sides) in the locations indicated by the arrows/red dots.

i think its clear where we should be looking but please confirm, or even better, let us know if you can take pictures of your set up so i can pass them along.

also, can you give me the first couple digits of your serial number which will indicate age? it should be something like PB0643 for example.

thanks!

Attachments