Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84521members
353756posts

F06 Error

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
Lucasreb_apc
Crewman
Crewman
0 Likes
1
716

F06 Error

This was originally posted on APC forums on 11/25/2020


Hello,

 

I am facing a F06 problem after leaving a Back Up Pro UPS 1500 VA 3 months without use.

 

Can anyone halp me on how to fix it or how to replace this unit or something?

 

Thanks. 


Accepted Solutions
Brian123_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
716

Re: F06 Error

This was originally posted on APC forums on 12/4/2020


F06. Relay Welding. Internal problem. Call Customer support is what APC says in their manual.

One of the internal relays has stuck contacts. Could be the contacts are welded, electronics driving a relay has a problem, electronics that sense the relays position has a problem.

If you do a web search. Lets say for APC F06 error. You will find added information on an F06 error.

See Answer In Context

1 Reply 1
Brian123_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
717

Re: F06 Error

This was originally posted on APC forums on 12/4/2020


F06. Relay Welding. Internal problem. Call Customer support is what APC says in their manual.

One of the internal relays has stuck contacts. Could be the contacts are welded, electronics driving a relay has a problem, electronics that sense the relays position has a problem.

If you do a web search. Lets say for APC F06 error. You will find added information on an F06 error.