Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2908:29 PM. Last Modified: 2024-03-2112:51 AM
ES 725 Hibernates PC but immediately reboots
Hi
I have the ES 725 with a new battery. I also have Windows 8 with the Powerchute software 3.02
When the power is cut to the UPS, Powerchute immediately sends the PC into hibernation which is what I want. But once it finishes going into hibernation, it just reboots. For the test I did, I had unplugged the UPS. After it booted up (or perhaps it was during), I plugged the UPS back in. ONce the PC was booted, the UPS beeped a few times and the computer lost power and had a hard shutdown.
My question is why is the PC rebooting after going into hibernation? I mean it immediately reboots, there is no delay.