Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82165members
349749posts

Connecting UPS to PC and NAS storage at the same time

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
mfardoos_apc
Crewman
Crewman
0 Likes
1
150

Connecting UPS to PC and NAS storage at the same time

This was originally posted on APC forums on 9/7/2010


I just bought a BE750G UPS for my ReadyNAS NV storage unit. It works great so far and the storage is able to directly communicate with the UPS. That is the intended configuration but I was wondering if there was a way to take advantage of the supplied software which is intended for a PC and provides much more details about the UPS than my storage unit can display. Is there a way to have the UPS communicate with both devices?
Thanks in advance, Moe


Accepted Solutions
mfardoos_apc
Crewman
Crewman
0 Likes
0
150

Connecting UPS to PC and NAS storage at the same time

This was originally posted on APC forums on 9/7/2010


I just bought a BE750G UPS for my ReadyNAS NV storage unit. It works great so far and the storage is able to directly communicate with the UPS. That is the intended configuration but I was wondering if there was a way to take advantage of the supplied software which is intended for a PC and provides much more details about the UPS than my storage unit can display. Is there a way to have the UPS communicate with both devices?
Thanks in advance, Moe

See Answer In Context

1 Reply 1
mfardoos_apc
Crewman
Crewman
0 Likes
0
151

Connecting UPS to PC and NAS storage at the same time

This was originally posted on APC forums on 9/7/2010


I just bought a BE750G UPS for my ReadyNAS NV storage unit. It works great so far and the storage is able to directly communicate with the UPS. That is the intended configuration but I was wondering if there was a way to take advantage of the supplied software which is intended for a PC and provides much more details about the UPS than my storage unit can display. Is there a way to have the UPS communicate with both devices?
Thanks in advance, Moe