Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84713members
354107posts

Battery replacement date storage location

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
Waynedunham_apc
Crewman
Crewman
0 Likes
3
216

Battery replacement date storage location

This was originally posted on APC forums on 3/8/2017


I have multiple APC BackUPS, RS, and SmartUPS units (6 total) throughout my home.  Four are hooked up to PCs, one at my bedroom tv/roku/dvd, etc, and the last one is hooked to my network rack (cable modem, switch, router, etc) downstairs.

 I am curious where the battery replacement date is stored.  Is it stored on the APC unit, or in the powerchute software?   I'd like to have the dates on each unit and was wondering if I can just take my laptop with powerchute on it around to the 2 units that aren't attached to any computers and update the battery replacement date without messing up the correct date in powerchute for the unit the laptop is usually hooked to?


Accepted Solutions
Waynedunham_apc
Crewman
Crewman
0 Likes
0
215

Re: Battery replacement date storage location

I was talking about the battery pack manufacture date code on the batteries, not the date you replaced the pack in the ups

See Answer In Context

Tags (1)
3 Replies 3
BillP
Administrator Administrator
Administrator
0 Likes
1
216

Re: Battery replacement date storage location

This reply was originally posted by Secret on APC forums on 3/8/2017


Hi Wayne,

On most of the older APC units, the Battery Replacement Date is stored in the UPS but is only accessible via the PowerChute software. Newer Smart-UPS models can have the battery replacement date updated via the LCD display, PowerChute Software or the separately sold Network Management Card. The method of accessing this information via your laptop would be fine for your two stand alone units and will not effect the laptops's normal UPS, as the battery replacement date is specific to the UPS and not the software.

Secret Squirrel

Waynedunham_apc
Crewman
Crewman
0 Likes
0
216

Re: Battery replacement date storage location

This was originally posted on APC forums on 3/8/2017


  Exactly the info I was looking for, thanks.

Waynedunham_apc
Crewman
Crewman
0 Likes
0
216

Re: Battery replacement date storage location

I was talking about the battery pack manufacture date code on the batteries, not the date you replaced the pack in the ups

Tags (1)