BX750MI LED Brightness

[mattym]

Hi,

think this maybe a firmware bug but on the BX750MI UPS you can adjust the brightness level of the front LEDs by holding the power button for less than 2 or 3 seconds.

This works ok but I found that every 14 days when it runs a brief self test the brightness level returns back to full brightness. 😕

Thanks

[JonPro]

Hi @mattym 

Unfortunately, I do not have this UPS in our lab and couldn't test it but I have a feeling that it shouldn't behave that way.  I suggest that you raise a case to our Technical Support Team that covers your region.

Reach out to our Customer Care team in your location.