Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84257members
353361posts

APC UST Bi10 compatability with Generac 8kw HSB

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
chicagomike_apc
Cadet
0 Likes
3
162

APC UST Bi10 compatability with Generac 8kw HSB

This was originally posted on APC forums on 4/26/2013


I recently bought a home out of foreclosure...generator was in place (generac 8KW hsb) but the homes panel and transfer switch were removed...

I would like to use the APC Universal transfer switch as I already have one---and the generac ones are an inferior product and cost even more!

Is there a manual or guide for hooking up generac standby generators to the Bi10??

looks like a 4 wire control system similar to Honda...


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
162

Re: APC UST Bi10 compatability with Generac 8kw HSB

This reply was originally posted by Secret on APC forums on 4/26/2013


http://forums.apc.com/message/47417#47417

See Answer In Context

3 Replies 3
BillP
Administrator Administrator
Administrator
0 Likes
0
163

Re: APC UST Bi10 compatability with Generac 8kw HSB

This reply was originally posted by Secret on APC forums on 4/26/2013


Hi chicagomike,

The generac 8KW hsb is 120/240vac single phase split phase. I UTS10BI would be a perfect fit for it.I would certainly recommend consulting with an electrician for installation. The UTS10BI is an automatic transfer switch, however does not come with the necessary connector for full Automatic function. There are some additional forum posts here which describe the necessary components and recommended way to obtain them.

chicagomike_apc
Cadet
0 Likes
0
163

Re: APC UST Bi10 compatability with Generac 8kw HSB

This was originally posted on APC forums on 4/26/2013


Thanks for the help...can you direct me to the posts you mention??

Sent from my iPhone

BillP
Administrator Administrator
Administrator
0 Likes
0
163

Re: APC UST Bi10 compatability with Generac 8kw HSB

This reply was originally posted by Secret on APC forums on 4/26/2013


http://forums.apc.com/message/47417#47417