Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84704members
354081posts

APC Back-UPS RS 1000 making high pitch noise

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

GTAgomez_apc
Crewman
Crewman
0 Likes
0
188

APC Back-UPS RS 1000 making high pitch noise

This was originally posted on APC forums on 1/19/2020


My UPS, every 5 seconds, makes a high pitched sound when it is in On Line mode, which only disappears when the UPS is turned off, or charging the battery. It doesn't matter if the load is connected or not, at all times it makes that sound.
I already try to recalibrate the battery, disconnect it and press the power button for 10 seconds, change the sensitivity in PowerChute, press the reset button, change the batteries, but the sound did not disappear.
My initial suspicion was that it could be the transformer, so I verified the operation of the AVR, and with 208v in the line, the UPS did not correct it, and delivered 208v anyway; Is this related to high frequency sound?
The model is: BR1000I and my region is 220V / 50hz

Thanks!