problem with ap9212 ap9606

[Anonymous user]

well i buy ap9212 and i configure it and it works so i prepare the device to connect my router lab to it
i only turn it of and know i dont understand what going on
look hope you could help me

About System

Model Number : ~~~~~~~~~~ Serial Number : ~~~~~~~~~~~~~~~~~~
Manufacture Date : ~~~~~~~~~~ Hardware Revision : ~~~~
MAC Address : FF FF FF FF FF FF
Flash Vendor : AMD

Press to continue...

-----------------------------------------------------------------------
Module Information

Description : MasterSwitch APP
-----------------------------------------------------------------------
Name : ms220.bin Type : StatApp
Version : v2.2.0 Sector : 4
Date : 03/19/2001 Time : 15:07:15
CRC16 : 7104

Press to continue...

Description : Web/SNMP Management Card AOS
-----------------------------------------------------------------------
Name : aos303.bin Type : APC OS
Version : v3.0.3 Sector : 11
Date : 03/19/2001 Time : 15:05:50
CRC16 : B44D

Press to continue...
the green status led blinking green my mac address was before 00-c0-b7-64-db-64 but now its deleted ??

American Power Conversion Web/SNMP Management Card AOS v3.0.3
(c) Copyright 2000 All Rights Reserved MasterSwitch APP v2.2.0
-------------------------------------------------------------------------------
Name : Unknown Date : 01/01/1998
Contact : Unknown Time : 12:13:04
Location : Unknown Up Time : 0 Days 0 Hours 13 Minutes
Status : P+ N? A+ User : Administrator

MasterSwitch : Serial Communication Established

i look what it deos mean status N? but cant find that

maybe i must upgrade is there some better firmware and which i shouldupgrade ?? if i must

thx for helping peter

Message was edited by: peter12

[Anonymous user · Accepted solution]

well i buy ap9212 and i configure it and it works so i prepare the device to connect my router lab to it
i only turn it of and know i dont understand what going on
look hope you could help me

About System

Model Number : ~~~~~~~~~~ Serial Number : ~~~~~~~~~~~~~~~~~~
Manufacture Date : ~~~~~~~~~~ Hardware Revision : ~~~~
MAC Address : FF FF FF FF FF FF
Flash Vendor : AMD

Press to continue...

-----------------------------------------------------------------------
Module Information

Description : MasterSwitch APP
-----------------------------------------------------------------------
Name : ms220.bin Type : StatApp
Version : v2.2.0 Sector : 4
Date : 03/19/2001 Time : 15:07:15
CRC16 : 7104

Press to continue...

Description : Web/SNMP Management Card AOS
-----------------------------------------------------------------------
Name : aos303.bin Type : APC OS
Version : v3.0.3 Sector : 11
Date : 03/19/2001 Time : 15:05:50
CRC16 : B44D

Press to continue...
the green status led blinking green my mac address was before 00-c0-b7-64-db-64 but now its deleted ??

American Power Conversion Web/SNMP Management Card AOS v3.0.3
(c) Copyright 2000 All Rights Reserved MasterSwitch APP v2.2.0
-------------------------------------------------------------------------------
Name : Unknown Date : 01/01/1998
Contact : Unknown Time : 12:13:04
Location : Unknown Up Time : 0 Days 0 Hours 13 Minutes
Status : P+ N? A+ User : Administrator

MasterSwitch : Serial Communication Established

i look what it deos mean status N? but cant find that

maybe i must upgrade is there some better firmware and which i shouldupgrade ?? if i must

thx for helping peter

Message was edited by: peter12